Luxura®️ Deck 200Mineral Composite Non-combustible decking board

New in the Luxura® range is the Luxura® Deck 200 decking board!

The Deck 200 mineral composite non-combustible deck board is a wider board module with a new fine brushed grain finish for a more contemporary appearance. Available in both the Aged Oak and Hickory colours the wider board has a 200mm design module gives a bold and clean appearance much like a machined hardwood deck.

As with the rest of the Luxura® non-combustible decking range, the same simple concealed clip fixing can be used as well as fixing directly through the board if needed.

KEY FEATURES

Luxura®️ Deck simply delivers unrivalled benefits:

  • Natural woodgrain timber-look aesthetic
  • A1 Non-combustible fire rating
  • Hard wearing mineral composite for ultimate durability
  • Exceptional slip and wear resistance
  • Stain resistant, easy-clean surface
  • Stays cool underfoot in hot weather
  • Will never warp, twist or rot
  • 30 year warranty
  • 60 year design life

COLOURS

Luxura®️ Deck is available Natural Hickory or Natural Aged Oak. They are finished with our special Luxura woodgrain pattern.

CALL US NOW ON +44 (0) 330 94 94 11
TO ORDER YOUR FREE SAMPLE

INSTALLATION

Luxura® Deck 200 can be installed onto any of MyDek’s subframe systems as well as onto steel frame projecting balconies. Additionally, where needed, the boards can be cut required widths and surface fixed through the board. Simple, Smart, Sustainable.  MyDek. Made to be Your Choice.

Where can Luxura Deck 200 be used?

  • High-rise residential balconies and terraces
  • Hospitality and Commercial decks and terraces
  • Boardwalks, swimming pool decks and pontoons
  • Domestic decks and patios

SYSTEMS FOR ALL APPLICATIONS

Fixed using box rail onto concrete balcony/terrace.

For smaller inset balconies and terraces where a low-cost, simple and flexible subframe system is required. The aluminium system comes with a combination of different joist and support cleat sizes allowing a versatile range of construction heights.
More Information

J-ClipTM is fully compatible with the MyDek BoxRail System

For use on balconies, terraces with a concrete or similar solid base structure, walkways, boardwalks, residential, leisure and commercial areas.

 

 

More Information

TECH SPECS

DIMENSIONS

Board width x depth 194 x 25mm (150mm module)
Board length 2.44m max or cut to length within 2.44m (subject to conditions)

MATERIAL

Board Calcium silicate and mineral fibre composite
Finish Solid, through-colour, textured woodgrain finish

PRODUCT CODES

Natural Hickory LP21.2440.HICK
Natural Aged Oak LP21.2440.AOAK

COLOUR RANGE

Natural Hickory Natural Aged Oak

APPLICATIONS

For use on balconies, walkways, roof terraces, leisure areas and patios

STORAGE AND HANDLING

All storage, logistics and installation must be conducted under an appropriate risk assessment and method statement.

  • Always wear gloves when handling boards.
  • Boards must be stored flat, supported along their entire length such as on a suitable pallet.
  • Store in a dry, ventilated area
  • Do not store boards in damp or exterior conditions, this can cause mould build-up between the boards.
  • Do not overload pallets, failure of a pallet can cause the stack to topple. Instead, stack up to 2 metres high in total and within the capacity of the pallet.
  • Do not drag boards off the stack, instead, avoid scratches by lifting boards using a suitable technique, and where possible using suitable lifting aids.
  • Use lifting aids and Personal Protective Equipment as set out in the risk assessment and method statement.
DOWNLOAD DATASHEET

PERFORMANCE STANDARDS

QUALITY STANDARD VALUE LIMIT

Slip resistance - Wet

BS7976 -2

39.5 PTV

>36

Deflection – 80kg at 500mm span

EN310

<1mm

<5mm

Deflection – 2Kn at 500mm span

EN310

<2mm

<5mm

Slip resistance – DRY (Slider 4S - 96)

BS7976 – 2

60 PTV

>36 PTV

Slip resistance – WET (Slider 4S - 96)

BS7976 – 2

43 PTV

>36 PTV

NBS SPECIFICATION

REQUEST A SAMPLE

Related products and services

Virtually tool-free installation means that fitting the MyDek® System onto your terrace or inset balcony is rapid and accurate, and with the super-low SupportRail™ profile you can achieve finished floor levels from 60-200mm above the structural level.

To keep up to date with the latest industry news and our products – Sign up for our newsletter

Our newsletters are packed with valuable industry insights around Building Fire Safety, non-combustible balcony decking facts, product developments and other essential industry topics. Make sure you keep up to speed with what's going on by signing up!